Skip to content Skip to sidebar Skip to footer

How To Remove A Bathtub Spout That Is Stuck

How To Remove A Bathtub Spout That Is Stuck. For removing old tub spout, you must turn the cam in a clockwise direction. Unscrew the tub spout in a counterclockwise rotation until the tub spout is removed off of the brass adapter.

Remove Bathtub Spout Stuck / Shower Diverter Valve Fix
Remove Bathtub Spout Stuck / Shower Diverter Valve Fix from evantaverna.blogspot.com

Don't see a set screw so i'm assuming it's twist off. You need to also be careful not to lose this screw, which is easily done. Continue doing it until it comes loose.

I Felt The Need To Show How I Problem Solved Removing My Troublesome Spout After I Couldn't Find Anyon.


You will need to pull slightly as you turn the fixture to engage any remaining stripped threads on the tub spout. Sometimes the heat may come to your hands and injure you. If you have a tub spout that is stuck, you can try using a knife to cut around the edge of the spout.

In This Video I Show How I Removed My Stuck Tub Spout.


Remove any caulking around the wall end of the tub spout with a putty knife or razor. Tried hard with wrenches to remove but no luck. For removing old tub spout, you must turn the cam in a clockwise direction.

Simply Turn The Tub Spout In A Counterclockwise Motion.


Vinegar is an effective and efficient way to remove calcification from your tub spout. I am in the process of rebuilding a vintage early 80s gerber tub / shower valve. Simply turn the screw clockwise.

3 Alternative Ways For Bathtub Spout Removal Hairdryer.


I hit it with wd40 to little avail and eventually i turned it hard enough that the copper pipe in the wall started turning, but still no luck on this bad boy. Make sure wearing the rubber gloves. Don't see a set screw so i'm assuming it's twist off.

A Hairdryer Or Simply Running Very Hot Water Through Your Tap May Loosen Your Spout From The Wall.


When the screw has been removed it is time to pull the spout out of the wall. Unscrew the tub spout in a counterclockwise rotation until the tub spout is removed off of the brass adapter. If the tub spout still does not come out, you will have to use a hairdryer to give some heat and dry out the moisture that is making it stick to the area.